Plasma in general Co-relation between RF Forward power and Vpp
2022.04.27 17:35
Hello,
I am working on a ALD (Atomic layer deposition) product wherein we are processing multiple wafers in the single reactor.
When we supply RF power to one of the reactor (i.e. REACTOR 1), the other reactor (REACTOR 2) beside reactor 1 is showing high Vpp value. We are not supplying RF power to reactor 2. (Please note reactor 1 & reactor 2 share the gas flow volume and are not fully isolated)
Why would this be happening ?
댓글 2
-
김곤호
2022.04.28 17:57
추천:1 댓글
-
서태현
2022.05.03 11:25
What component is Vpp sensor installed on?
If Vpp sensor is attached to the matching network, check if the signal actually comes out from the analog signal. Remove the data cabler and measure it with the DVM on the matching network.
You need to check whether it is actual analog noise or actual measurement, and if it is measured on the matching network, it would be faster to test the replacement. Check if Match and GND are connected (signal GND, Match GND)
If there is a separate VI probe, you should suspect that there is a floating circuit.
번호 | 제목 | 조회 수 |
---|---|---|
공지 | [필독] QnA 글 작성을 위한 권한 안내 [88] | 2910 |
공지 | Q&A 검색 길잡이 – 내게 필요한 정보를 더 빠르게 찾는 방법 | 14121 |
공지 | 개인정보 노출 주의 부탁드립니다. | 50053 |
공지 | kr 입자 조사에 의한 Cu 스퍼터링 에너지 및 이탈 속도 분포 함수 | 61994 |
공지 | 질문하실 때 실명을 사용하여주세요. [2] | 80720 |
20 | Massbalance equation 에서 P(t) 유도과정 | 270 |
19 | VPS 공정에서 압력변수관련 질문입니다. [1] | 269 |
18 | MFP와 Sheath 관련하여 추가 질문 드립니다. [1] | 268 |
17 |
염소발생 전기분해 시 스파크 발생에 관해 질문드립니다.
[1] ![]() | 262 |
16 | N2 / N2O Gas 사용시 Plamsa 차이점 [1] | 254 |
15 | Fluoride 스퍼터링 시 안전과 관련되어 질문 [1] | 254 |
14 | KM 모델의 해석에 관한 질문 [1] | 245 |
13 | 자외선 세기와 결합에너지에 대해 질문드립니다. [1] | 244 |
12 | 타겟 임피던스 값과 균일도 문제 [1] | 238 |
11 | H-field 측정위치에 따른 H Field MAP 변화 관련 [1] | 235 |
10 | etch defect 관련 질문드립니다 [1] | 225 |
9 | SiO2 박말 밀도와 반응성 간 상관 관계 질문 [1] | 212 |
8 | doping type에 따른 ER 차이 [1] | 201 |
7 |
연속 Plasma시 예상되는 문제와 횟수를 제한할 경우의 판단 기준
[1] ![]() | 200 |
» | Co-relation between RF Forward power and Vpp [2] | 182 |
5 | 공정 진행 중 의도적인 섭동 효과에 대해서 질문 드립니다. [1] | 167 |
4 | 안녕하세요 DBD 플라즈마 소독 관련질문입니다. [1] | 166 |
3 | 플라즈마 샘플 위치 헷갈림 [1] | 160 |
2 |
구 대칭으로 편광된 전자기파를 조사할 때에 대한 질문입니다.
[1] ![]() | 129 |
1 | 플라즈마 세정처리한 PCB, Lead Frame 재활용 방법 [1] | 110 |
It seems to be an RF ground issue, and check it.