연도 2016 
저널명 Fusion Engineering and Design 
 

Abstract


The blisters formation and destruction induced by the deuterium ions on a polycrystalline tungsten wereinvestigated with varying irradiation deuterium ion fluence from 3.04 × 1023to 1.84 × 1025D m−2s−1and an fixed irradiated ion energy of 100 eV in an electron cyclotron resonance plasma source, whichwas similar to the far-scrape off layer region in the nuclear fusion reactors. Target temperature wasmonitored during the irradiation. Most of blisters formed easily on the grain with (1 1 1) plane orientationwhich had about 250 nm in diameter. In addition, the areal number density of blisters increased withincreasing the ion fluence under the surface temperature reaching to about 900 K. When the fluenceexceeded 4.6 × 1024D m−2, the areal number density of the blister decreased. It could be explained thatthe destruction of the blister was initiated by erosion at the boundary region where the thickness ofblister lid was thin and the sputtering yield was high by oblique incident ions, resulting in remaining thelid open, e.g., un-eroded center dome. It is possible to work as a tungsten dust formation from the plasmafacing divertor material at far-SOL region of fusion reactor.


https://doi.org/10.1016/j.fusengdes.2016.02.033

연도 저널명 제목 조회 수
2006  Japanese Journal of Applied Physics  Etching of Multi-Walled Carbon Nanotubes Using Energetic Plasma Ions 4317
2006  Japanese Journal of Applied Physics  Investigation of Current on the Conducting Target Biased with a Large Negative Potential in the Non-Uniform Plasma 4555
2006  Journal of the Korean Physical Society  Capacitance Between an Atmospheric Discharge Plasma and the Dielectric Electrode in the Parallel Cell Reactor 6538
2006  Journal of the Korean Physical Society  Optimum Operating Frequency of an Atmospheric-Pressure Dielectric-Barrier Discharge for the Photo-Resistor Ashing Process 7308
2006  Journal Of The Korean Physical Society  Plasma Density Monitoring Based on the Capacitively- and Inductively-Coupled-Plasma Models 5704
2006  한국진공학회지  PSII 펄스 시스템의 동적 플라즈마 부하 회로 모델 개발 8454
2007  Physics of Plasmas  Variation of plasma parameters on boundary conditions in an inductively coupled plasma source for hyperthermal neutral beam generation 5188
2008  Review of Scientific Instruments  Self-consistent circuit model for plasma source ion implantation 6112
2009  Journal of Applied Physics  Plasma uniformity and phase-controlled etching in a very high frequency capacitive discharge 5760
2009  Journal of Korean Physical Society  Electron Density Monitoring By Using the V-I Phase Difference with a Circuit Model for a kHz Atmospheric-Pressure Dielectric Barrier Discharge 10088
2009  Journal of the Korean Physical Society  A New Langmuir Probe Analysis Algorithm Based on Wavelet Transforms to Obtain the Electron Energy Distribution Function of a Bi-Maxwellian Plasma 6024
2009  Journal of Korean Physical Society  Effect of Bias Frequency on the Accuracy of Floating Probe Measurements 8551
2009  Journal of Vacuum Science & Technology  Effect on plasma and etch-rate uniformity of controlled phase shift between rf voltages applied to powered electrodes in a triode capacitively coupled plasma reactor 6400
2010  Carbon  Mechanism of cone-shaped carbon nanotube bundle formation by plasma treatment 6837
2010  Thin Solid Films  Effects of argon and oxygen flow rate on water vapor barrier properties of silicon oxide coatings deposited on polyethylene terephthalate by plasma enhanced chemical vapor deposition 8235

Archives


XE Login