연도 2006 
저널명 Japanese Journal of Applied Physics 
 

The interactions between energetic ions and nanotubes are important in the fabrication of plasma-aided carbon nanotubes, especially in the process of sputter-etching and particle encapsulation into the nanotubes. In this study, it was investigated that the bamboo structured multi-walled carbon nanotubes (MWNTs) was sputter-etched by plasma ion irradiation with various energies which were less than those used in the ion beam experiments. In the plasma, the surface opening of the MWNTs began at the irradiated ion energy of 20 eV and the open tips of the MWNTs were obtained by increasing the irradiated ion energy as 70 eV. When the ion energy exceeded 100 eV, the etching was enhanced by the rupturing and breaking processes and almost half of the MWNTs were etched out by the 150 eV ions. The irradiated ion energy was controlled effectively by the sheath potential formed in front of the MWNTs which was immersed in the nitrogen plasma.


https://doi.org/10.1143/JJAP.45.8317

연도 저널명 제목 조회 수
1999  Journal of aerosol science  Charge measurement on monodisperse particles in a DC glow discharge plasma 4650
2001  Japanese journal of applied physics  Plasma Source Ion Implantation for Ultrashallow Junctions: Low Energy and High Dose Rate 4941
2006  Japanese Journal of Applied Physics  Etching of Multi-Walled Carbon Nanotubes Using Energetic Plasma Ions 4305
2006  Japanese Journal of Applied Physics  Investigation of Current on the Conducting Target Biased with a Large Negative Potential in the Non-Uniform Plasma 4536
2015  J. Phys. D: Appl. Phys.  Determination of electron energy distribution function shape for non-Maxwellian plasmas using floating harmonics method 3275
2016  International Journal of Refractory Metals and Hard Materials  Improvement of mechanical property of air plasma sprayed tungsten film using pulsed electric current treatment 3184
2017  International Journal of Refractory Metals & Hard Materials  Fabrication of sintered tungsten by spark plasma sintering and investigation of thermal stability 2968
2015  IEEE TRANSACTIONS ON Semiconductor Manufacturing  Enhancement of the Virtual Metrology Performance for Plasma-assisted Oxide Etching Processes by Using Plasma Information (PI) Parameters 4190
2018  IEEE Transactions on Semiconductor Manufacturing  Development of the Virtual Metrology for the Nitride Thickness in Multi-Layer Plasma-Enhanced Chemical Vapor Deposition Using Plasma-Information Variables 28202
1992  IEEE Transactions On Plasma Science  Double Layer-Relevant Laboratory Results 3780
2001  IEEE Transactions On Plasma Science  Scaling Characteristics of Plasma Parameters for Low-Pressure Oxygen RF Discharge plasmas 4185
2011  IEEE TRANSACTIONS ON PLASMA SCIENCE  Hydroxyl Radical Generation on Bubble Surface of Aqua-Plasma Discharge 7399
2014  IEEE TRANSACTIONS ON PLASMA SCIENCE  Characteristics of OH* Generation in Pin-to-Electrolyte Discharges 1138
2015  IEEE TRANSACTIONS ON PLASMA SCIENCE  Bullet Velocity Distribution of a Helium Atmospheric-Pressure Plasma Jet in Various N2/O2 Mixed Ambient Conditions 1209
2019  IAEA CRP report  Evaluation of tritium inventory in irradiated tungsten by atomic-scale modeling 601

Archives


XE Login