연도 2024 
저널명 Fusion Engineering and Design 
1-9 

https://doi.org/10.1016/j.fusengdes.2024.114607

 

Abstract


This study investigated the effect of plasma charging of the dielectric materials on the floating sheath distribution. The sheath measurements were conducted with two targets with heterogeneous material junctions, the Al2O3–metal target and the Si wafer–metal target, with a bias of −100 V on the metal target. The potential difference of the floating sheath formed on the Al2O3 was enlarged compared with that of the Si because of the smaller plasma charge accumulation because of low dielectric constant on the Al2O3. The accumulation charges are lost through the leakage current and the nonuniformity of sheath distribution for Si wafer–metal target was enhanced. Hence, the sheath electric field strength was stronger, the tilt angle was steep, and the nonuniform region became wider. This work demonstrated the plasma charging effect on the distribution of sheaths on the edge ring and the sheath electric field formed at the interface of nonconducting and conducting materials varied with the dielectric property of nonconducting material.

연도 저널명 제목 조회 수
2024  Plasma Physics and Controlled Fusion  Data-driven plasma science based plasma etching process design in OLED mass production referring to PI-VM file 257
2024  Physics of Plasmas  Micro-range uniformity control of the etching profile in the OLED display mass production referring to the PI-VM model file 265
2024  Current Applied Physics  Analysis of electron thermal properties in Ar/O2 inductively coupled plasmas: A global model simulation using Langmuir probe data 293
2024  Fusion Engineering and Design  Sputtering yield increase with fluence in low-energy argon plasma-tungsten interaction file 530
2024  Journal of the Korean Physical Society  Macrocrack propagation with grain growth on transient heat loaded tungsten file 663
2024  Physics of Plasmas  Plasma heating characterization of the large area inductively coupled plasma etchers with the plasma information for managing the mass production file 763
2024  Current Applied Physics  Observation of the floating sheath distribution on Al2O3 and silicon targets adjacent to a DC biased metal substrate 853
2024  IEEE Transactions on Semiconductor Manufacturing  Application of Plasma Information-Based Virtual Metrology (PI-VM) for Etching in C4F8/Ar/O2 Plasma 972
2024  IEEE Transactions on Semiconductor Manufacturing  Application of Plasma Information-Based Virtual Metrology (PI-VM) for Etching in C4F8/Ar/O2 Plasma 972
2022  Current Applied Physics  Investigation of ion-induced etch damages on trench surface of Ge2Sb2Te5 in high density Ar/SF6 plasma 767
2022  Journal of Alloys and Compounds  Competitive roles of dislocations on blister formation in polycrystalline pure tungsten file 950
2022  Journal of the Korean Physical Society  Plasma Information-based virtual metrology (PI-VM) and mass production process control file 1621
2022  Physics of Plasma  2022 Review of Data-Driven Plasma Science file 1633
2022  Plasma Sources Science and Technology  Investigation of ion collision effect on electrostatic sheath formation in weakly ionized and weakly collisional plasma file 1903
2021  Journal of the Korean Physical Society  Phenomenology-based Model Predictive Control of Electron Density in Ar/SF6 Capacitively Coupled Etch Plasma 633

Archives


XE Login