연도 2000 
저널명 Plasma sources science & technology 
 

Time-averaged plasma potential in an inductive source with a ground wall has been measured by using an emissive probe. The inflection point method in the limit of zero emission is employed to determine the plasma potential. In this source, capacitive coupling results in a fluctuating plasma potential. The peak-to-peak value of the radiofrequency (RF) fluctuations, which is approximately given by the separation of the two peaks in the derivative of an I -V characteristic curve, has been reduced by introducing a gap between the antenna and the quartz window and by various electrostatic screens. Experimental data show that the lower potential peak, representing the lowest plasma potential, was approximately constant as the RF fluctuation level was reduced, while the higher potential peak, indicating the more positive plasma potential, changed and approached the lower potential peak. For very low fluctuation level, the lower potential peak becomes the dc plasma potential and only the higher potential peak responds to the RF fluctuation.


https://doi.org/10.1088/0963-0252/9/1/302

연도 저널명 제목 조회 수
2024  Physics of Plasmas  Micro-range uniformity control of the etching profile in the OLED display mass production referring to the PI-VM model file 265
2024  Plasma Physics and Controlled Fusion  Data-driven plasma science based plasma etching process design in OLED mass production referring to PI-VM file 280
2024  Current Applied Physics  Analysis of electron thermal properties in Ar/O2 inductively coupled plasmas: A global model simulation using Langmuir probe data 293
2024  Fusion Engineering and Design  Sputtering yield increase with fluence in low-energy argon plasma-tungsten interaction file 530
2024  Journal of the Korean Physical Society  Macrocrack propagation with grain growth on transient heat loaded tungsten file 663
2024  Physics of Plasmas  Plasma heating characterization of the large area inductively coupled plasma etchers with the plasma information for managing the mass production file 763
2024  Current Applied Physics  Observation of the floating sheath distribution on Al2O3 and silicon targets adjacent to a DC biased metal substrate 853
2024  IEEE Transactions on Semiconductor Manufacturing  Application of Plasma Information-Based Virtual Metrology (PI-VM) for Etching in C4F8/Ar/O2 Plasma 972
2024  IEEE Transactions on Semiconductor Manufacturing  Application of Plasma Information-Based Virtual Metrology (PI-VM) for Etching in C4F8/Ar/O2 Plasma 972
2022  Current Applied Physics  Investigation of ion-induced etch damages on trench surface of Ge2Sb2Te5 in high density Ar/SF6 plasma 767
2022  Journal of Alloys and Compounds  Competitive roles of dislocations on blister formation in polycrystalline pure tungsten file 950
2022  Journal of the Korean Physical Society  Plasma Information-based virtual metrology (PI-VM) and mass production process control file 1630
2022  Physics of Plasma  2022 Review of Data-Driven Plasma Science file 1649
2022  Plasma Sources Science and Technology  Investigation of ion collision effect on electrostatic sheath formation in weakly ionized and weakly collisional plasma file 1904
2021  Journal of the Korean Physical Society  Phenomenology-based Model Predictive Control of Electron Density in Ar/SF6 Capacitively Coupled Etch Plasma 642

Archives


XE Login